Aiphone AN-8000 Bedienungsanleitung PDF herunterladen (Seite 3)

The Example system pictured

throughout the guide will communicate

through a secure VPN between their Corporate

Office and their Operations Center. The

Example system will use the network subnet

192.168.1.X with a single AN exchange in one

site that we will call the Operations Center and

has chosen to locate their DVR, background

music source, and a paging amp in their

Corporate Headquarters. Their Operations

Center houses the AN-8000EX and an AN-

8000MS, AN-8011MS, AN-8020MS, AN-8050DS

and a paging amp and their Corporate HQ has

the AN-8500MS, AN-8540DS, and AN-8000MI.

If there were only an AN-8000EX a

computer would be used to program it, and

while it is possible to use a crossover cable,

Aiphone recommends using a switch.

Note: Unit Scan uses an ARP request which will not use the

WAN side of the router the computer is connected to because

ARP is a Link Layer protocol and only operates on the local area

network or a point-to-point link. It will not look beyond the

switch the computer is connected to.

AN Quickstart Guide Topics Overview

Section 1 Designing the System Setup a network the system will use to communicate

Section 2 Equipment List Tell the software what hardware it will connect to

Section 3 Setting Up Stations Configure master stations and door stations

Section 4 Uploading and Testing Save and upload and verify desired functionality

Section 5 Advanced: Call Forwarding Advanced settings on how to auto-forward calls to other masters

Advanced: Paging Zones Set up one way announcements to multiple stations and / or speakers

Advanced: Group Blocking Advanced settings on how to segment and restrict operator access

Advanced: Integration Background music, camera call up

Section 6 Troubleshooting AN specific tips for solving common issues

Appendix A Web Interface Logs Log file event definitions

Introduction

The AN-8000 system uses a network to connect intercoms and

securely communicate. Most installations will communicate over a local

area network, though some will involve VPN’s or NAT over a wide area

network. Several steps in the process can be very difficult or impossible at

a customer’s site using their network, for that reason this guide should be

completed step-by-step up through the Import from Scan Result step 2.2

before deploying the equipment to any network larger or more restricted

than a single out of box switch.

Section 1 Designing the System

Step 1.1 Use the Configuration Sheet to lay out the system. The

network administrator will need to provide static IP addresses for each

AN-8000EX, AN-8000MI, AN-8500MS and AN-8540DS. The customer,

also referred to in this guide as ‘operator’, will need to specify which

doors call which masters. Any Advanced features can be specified after

the basics are completed through Step 4.2.

Step 1.2 Using the CD provided install the AN software on a

computer that will be used to program the system. If the computer has

multiple networking cards disable or otherwise turn off any that are not

being used with the network connecting to the AN equipment. For the

Network Interface Card that is being used, assign the IP address to

192.168.1.100 or any other available IP address between 2 and 250.

Step 1.3 Open the AN-8000 software and select New System

unless new equipment is being added to an existing system. Click the

OK button and the Main Menu opens with four options, Unit Scan,

System Settings, Password Change and Clock Setting.

Step 1.4 From the Main Menu screen choose Unit

Scan and when the Unit Scan window opens click the Scan

button under the menu bar. When the scan completes and

the equipment list appears, double click each address and

change it to match what was given by the network

administrator and press enter. When each line has a unique

IP address, put a check in the box next on each line and click

Configuration to save those settings to the equipment. When

this finishes close the Unit Scan window and the program will

go back to the Main Menu.

1 2 3 4 5 6 7 8 ... 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Aiphone AN-8000 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Videoüberwachungssysteme Aiphone AN-8000